NOTE: Free essay sample provided on this page should be used for references or sample purposes only. The sample essay is available to anyone, so any direct quoting without mentioning the source will be considered plagiarism by schools, colleges and universities that use plagiarism detection software. To get a completely brand-new, plagiarism-free essay, please use our essay writing service.
One click instant price quote
There several ways to go about waxing a snowboard. Firs you have to determine what conditions you will be riding in. Then you will have to choose a wax. Say you are going to Vail and the snow condition are... well lets just say the temp... of the snow is about 20 .
Well the thing you need to do is find a low temp. wax. The way you determine a low temp. wax from a high temp.
wax is by the rating... Low temp. waxes will be in a range from - 20 to about 25 . A high temp.
wax will be in a range from about 25 to 40 . There are waxes made for higher conditions above 45 that are used in conditions that are referred to as, summer conditions. The wax that is used in summer conditions is a harder wax that will protect your board from sand, dust, and ice crystals. If you are riding in low temp.
conditions with a high temp wax your performance will not be that good. If the conditions are going to go back and forth in temp. you should wax your board with a low temp. wax or you can use a wax that can be used in all temps. 1. Select wax or waxes for correct snow temperature and condition. 2. Use in a well-ventilated area or with a respirator. (Only if you are hot waxing) 3.
Heat iron below the smoking iron temperature. 4. Melt the smallest end of the wax on the iron and drip all over the snowboard. 6. Let wax completely dry then scrape with a plastic or metal scraper. IF YOU ARE DOING A RUB ON WAS YOU WILL NEED TO FALLOW THESE INSTRUCTIONS 1.
Select wax or waxes for correct snow temperature and condition 2. Grasp wax firmly so that it is flat on the base of the board. 3. Put a thick coat of wax on the board to start with. 4. Scrape wax with a plastic or metal scraper. 5. Then apply a thin coat and buff with a buffing pad. If you you fallow these simple instructions you will have a successful experience waxing your board Bibliography: I wrote it my self
Free research essays on topics related to: wax, temperature, snow, iron, temp
Research essay sample on Correct Snow Temperature Low Temp Wax Conditions