NOTE: Free essay sample provided on this page should be used for references or sample purposes only. The sample essay is available to anyone, so any direct quoting without mentioning the source will be considered plagiarism by schools, colleges and universities that use plagiarism detection software. To get a completely brand-new, plagiarism-free essay, please use our essay writing service.
One click instant price quote
... 98 Second Edition adds the full mode list supported by your display hardware to the Display Properties Settings dialog box. Although most programs allow you to dynamically change color depth, some programs may not display colors or other elements correctly after a color change. To avoid this problem, change color depth before you start the program. If you change color depth while a program is running, you might need to restart the program to ensure that the changed If Windows 98 Second Edition is not using 32 -bit disk access, cursors are not animated.
To determine if you are using 32 -bit disk access, click Start, point to Settings, click Control Panel, and then double-click System. In the System Properties IRQ CONFLICTS WITH PCI DISPLAY ADAPTERS If your PCI display adapter is configured by your BIOS to use IRQ 15 and a functioning secondary PCI IDE disk controller is also configured to use IRQ 15 (by default), Windows 98 Second Edition assigns IRQ 15 to the IDE disk controller. This assignment forces your display adapter to use VGA mode. To load the accelerated Windows 98 Second Edition driver for your display adapter, eliminate the resource conflict. Choose one of the following methods: - If your BIOS allows, and the secondary PCI IDE controller is not being used, disable the secondary PCI IDE controller in the BIOS, and if it remains in Device Manager, disable it there - If your BIOS allows, disable the IRQ of the - If your BIOS allows, manually reconfigure the display adapter to use a different IRQ setting. - Obtain a BIOS upgrade from your hardware vendor.
With multiple-monitors you can use one computer to control two to nine monitors through a common desktop. Multiple-monitors increases the size of your screen, so you can see multiple applications Required Hardware for Multiple-Monitors Any combination of the following supported PCI-based cards can be used with multiple monitors. Only cards based on the following chipsets work as secondary cards with drivers from the Windows 98 Second Edition CD. NOTE: You also need to use the specified driver. - The following drivers are supported by Microsoft and are included on the Windows 98 Second Edition CD: -- ATI Mach 64 GX (GX, GXD, VT) ATIM 64. drv Only certain updates work.
These are 40, 42, 43, NOTE: If the card is at one of these updates, then Windows 98 Second Edition will recognize the card as a Trio 64 V+, provided the Microsoft driver is used. If the card is not at one of these updates, then it is recognized as a Trio 32 / 64. Some OEM drivers dont care which update is present; be sure to note carefully which Microsoft driver Windows 98 Second Edition selects when you use this card. Trident 9685 / 9680 / 9682 TRID PCI.
DRV - The following driver is located in the C: Windows System 32 drivers directory: Inter Graphics Systems (IGS) IGA 2 K. DRV - The following drivers are available directly from the vendor and work in multiple-monitor systems. These drivers are not supported by Microsoft. To download this driver used with these cards, visit the Web site at web In addition, newer cards and drivers that were not available when Windows 98 Second Edition was developed may also support multiple-monitors.
Consult the vendor documentation or contact the vendor to determine whether your card and drivers support 1. Determine which card you want to use as your primary card. First make sure that the card 2. Insert the card into your motherboard, and then add your second card. The system BIOS will decide which card is the primary card.
One way to verify which card is your primary card is to check which card displays the Windows 98 Startup logo when you turn on the computer. The card that displays the Startup logo is the primary card, and the card that appears to be inactive is the secondary card. If this is not what you want, reverse the order of 3. Repeat this procedure for each additional card. Unfortunately, with current system Bios, there is no way to determine which adapter will be the second, third, or fourth card until the card is actually 4. Start Windows 98 Second Edition.
Windows automatically detects the new cards. When you are prompted, restart 5. During Startup, Windows initializes the new secondary adapter and displays a message indicating the card is 6. If the primary card displays in 640 x 480 and 16 colors, right-click the desktop, click Settings, click the Colors down arrow, and then select the 256 Colors setting or a higher setting.
Click OK, 7. After you log on, right-click desktop, click Properties, and then click Settings. In the Display area, Windows lists each video adapter in your system. Find the adapter 8. Click the Extend my window desktop onto this monitor Troubleshooting Multiple-Monitor Setup Extend my Windows desktop onto this monitor 1. Make sure that the monitor is set to display in 2.
Verify that your secondary card is compatible 3. Make sure you are not using a Windows 3. 1 4. Check to see if you are using an ISA, VLB, or MCA card. Multiple-monitors require PCI or AGP cards 5.
Check to see whether any third-party display control panels are installed. Right-click the desktop, and then click Properties. Look for any tabs that are related to the video cards in your system. Next, click Settings, and then click Advanced. You should see only the General, Adapter, Monitor, Performance, Color Management, and possibly the ATI Display tabs. You can usually remove any Display Control Panel extensions that you find by using the Add/Remove Programs feature in the Control Panel.
If your system will not start when you have two video cards installed or if the second comes up with a "code 12 " in Device Manager, move all the video cards needed to the slots that are closest to the motherboard when on a riser card. Some systems only support display adapter cards in the first one or two slots closest to the If you experience one of the following problems, disable your on-board Rage II. This device cannot be used as one of your multiple-monitor display adapters. - Your on-board ATI Rage II displays vertical green bands when you install the secondary card. - Your system locks up during Startup, and the Automatic Skip Driver (ASD) reports that My system died while - Your IBM Active locks up during Startup after detecting the secondary, loading the drivers, and rebooting. - Nothing happens when you click the Extend my Windows desktop onto this monitor check box. If a yellow exclamation point appears beside one of your video cards in Device Manager and if it indicates the region of memory that the video card uses is in use, try one of - On some laptops, you can specify where the region of memory used by the video card is located in the system BIOS.
Set this to C 000 -CFFF or to the largest range possible that begins with C 000. - Type the following under the [ 386 enh] section of If your system locks up after installing the secondary card when you add a STB Workstation two-adapter card, then the video cards in this system are configured incorrectly by the system BIOS. As a result, it destabilizes the entire system. Your particular system probably cannot use video cards that are behind PCI-PCI bridges. If your card is listed in the supported card section, but Device Manager indicates that your card does not work with Multiple Display Support, then make sure that you are using the right driver, as listed at the beginning of this document. If Device Manager indicates that My primary video card cannot be disabled, your card is not supported in this If you experience one of the following problems, then your display driver is not compatible with multi-monitor. Contact - If your screen goes black during Startup or your system hangs and the Windows bootleg option indicates that the - A message appears on your screen indicating that a fatal Bibliography:
Free research essays on topics related to: windows 98, video cards, second edition, device manager, control panel
Research essay sample on Second Edition Device Manager
