NOTE: Free essay sample provided on this page should be used for references or sample purposes only. The sample essay is available to anyone, so any direct quoting without mentioning the source will be considered plagiarism by schools, colleges and universities that use plagiarism detection software. To get a completely brand-new, plagiarism-free essay, please use our essay writing service.
One click instant price quote
Windows 95 and NetWare 3. 12 and 4. 01 Servers Opening Files on NetWare 3. 11 Servers Lowercase Extended-Character Passwords on NetWare 4. 1 Servers Client for NetWare and Programs That Use External Files Installing Novell Client 32 Overwrites NetWare Directory Services Files Upgrading Over an Earlier Beta Version of Windows Printing to NetWare Directory Services Printers PLUG AND PLAY NETWORK CARDS AND 16 -BIT REAL-MODE DRIVERS INTEL ETHEREXPRESS 16 NICs AND PCI COMPUTERS To Install Windows 95 over Previous Builds PROBLEMS PRINTING TO POSTSCRIPT PRINTERS OVER A NETWARE NETWORK ISSUES AND INSTALLATION OF MS-DLC WITH WINDOWS 95 Arcade Backup Exec Network Backup Agent Cheyenne ARCserve Network Backup Agent REAL-MODE PROTOCOLS: WARNING ICONS ON YOUR NETWORK ADAPTER USING AN IBM THINKPAD WITH A DOCK II INTEL ETHEREXPRESS PRO / 100 B CARD NOT CORRECTLY DETECTED USING COMSPEC VARIABLES POINTING TO NETWORK COMMAND. COM FILES Windows 95 and NetWare 3. 12 and 4. 01 Servers Windows 95 with Microsoft Client for NetWare can experience problems with NetWare 3. 12 and 4. 01 servers if packet burst is turned on. This is a known problem with these servers that Novell has fixed and posted on their forums. Download the file Pburst.
exe from the Novell NetWare Forum on Compuserve or the Novell Web site Pburst. exe contains the patch for the affected servers. Opening Files on NetWare 3. 11 Servers Programs that open a large number of files consecutively in rapid succession might have occasional problems opening files on NetWare 3. 11 servers. This can also happen when opening a file in a folder for which you do not have file scan rights, such as an MS Mail shared post office. - "File not found" error on a file you know exists - "Sharing violation" or "Lock violation" error There are two solutions to these problems: - Obtain a patch file from Novell for the NetWare 3. 11 server. Using FTP, connect to ftp.
novell. com. Go to /pub / netware /nwo's / nw 311 /only and run 311 ptd. exe. This program will extract the file os 2 onyx. nlm.
Then, load the. nlm file onto the NetWare 3. 11 server. - Disable long filename support in Client for NetWare. This means that you will not be able to use long filenames on any NetWare servers from Windows 95. To disable long-filename support, carry out the 1.
Click the Start menu, click Run, and then type Regedit. HKEY Local MachineSystemCurrentControlSetServicesVxDNWRedir 3. Create a new binary value named support LFN with a value of 0. Lowercase Extended-Character Passwords on NetWare 4. 1 Servers In a NetWare 4. 1 environment, Client for NetWare does not support passwords that use certain lowercase extended characters.
Users need to change their password to all uppercase characters. Client for NetWare and Programs That Use External Files If you are using Microsoft Client for NetWare, and you run a program that needs to access an auxiliary file, your program will have problems if the auxiliary file is on a drive other than the one the program is on. This is because only the current drive is searched for auxiliary files; the search path is not searched. If you experience this problem, make sure the program and any auxiliary files are on the same drive. The Login Script Processor for the Microsoft Client for NetWare should correctly process all commands in your login scripts.
However, you cannot load memory-resident programs (TSRs) from these scripts. Installing Novell Client 32 Overwrites When you install Novell Client 32, the Novell setup program replaces the Microsoft file Netdef. inf and renames it Netdef. bnw, and deletes the NDS setup file Nwnds.
dll. The result is that after uninstalling Novell Client 32, Service for NetWare Directory Services will not To work around this problem, carry out the following steps: 1. Find the file Netdef. bnw and rename it Netdef. inf. 2. Copy the Nwnds.
dll file to the Windows System directory on your your hard disk by carrying out the following procedure: 1. Insert your Windows 95 installation CD into the CD-ROM drive. 3. Change to the Win 95 directory on your CD-ROM, and then type the following at the command prompt: extract /l c: windows system precept 2. cab nwnds. dll Upgrading Over an Earlier Beta Version of Windows If you upgrade this release of Windows over an earlier beta release, and you have Service for NetWare Directory Services installed, you will be prompted about version conflicts for the following files: When you see the version conflict prompt, click No. After Windows is installed, you need to reinstall Service for NetWare Directory Services.
To do this, carry out the following steps: 1. In Control Panel, double-click the Network icon. 2. Click Add, click Service, and then click Add. 3. Follow the instructions on your screen. Printing to NetWare Directory Services Printers You cannot install Client for NetWare Networks and Service for NetWare Directory Services (NDS) during the same installation session. If you do, your NDS printers will appear to be offline.
If your printers appear to be offline, try carrying out the following 1. In Control Panel, double-click the Network icon. 2. Remove both Client for NetWare Networks and Service for NDS. 4. In Control Panel, double-click the Network icon.
If your local area network is using NetWare 4. 1 or later, there is no need to install Client for NetWare Networks separately. When you install Service for NDS, it also installs the Client for NetWare Networks. PLUG AND PLAY NETWORK CARDS AND 16 -BIT REAL-MODE DRIVERS When you run the 16 -bit real-mode driver for your Plug and Play network interface card (NIC), your Plug and Play card might appear The reason the card appears to malfunction is that on most computers, the Plug and Play card is inactive until Windows 95 enables it. 16 -bit NIC drivers load before Windows 95 can turn on Plug and Play cards. Some 16 -bit NIC drivers do not recognize Plug and Play cards (most NE 2000 Plug and Play clones fall into this category). In this case, follow these steps to use your Plug and Play card with a 16 -bit NIC 1. Run the Softset utility that comes with your Plug and Play card, and then set the card to non-Plug and Play mode. 2.
Remove the network card from the list of devices in the Device Manager listing: In Control Panel, double-click the System icon, click the Device Manager tab, select the network card, and then 3. Reinstall the network card using the Add New Hardware icon in When you install a 32 -bit protect mode NIC driver in the future, you can rerun Softset to turn on Plug and Play mode for your card. This problem does not happen if you are using a 32 -bit protect-mode NIC INTEL ETHEREXPRESS 16 NICs AND PCI COMPUTERS If you are using an Intel Ether Express 16 -network interface card (NIC) in a PCI computer that has a Diamond Speed Star PCI video card, your system might hang or not initialize properly. These problems, according to Intel customer support, are not related to Windows 95 and happen If you have one of the following video cards, contact your vendor to Diamond Speed Star PCI video card with BIOS version 1. 01 Diamond Viper PCI VGA Video Adapter Diamond Stealth video card, BIOS v 1. 03 Other PCI video cards might also cause problems with this Intel NIC. In general, if you experience problems with your Ether Express 16 in a PCI computer other than those described above, please replace the card before reporting the problem to Microsoft.
When you upgrade to Windows 95 from Windows for Workgroups, your shares are not maintained. The folders / directories you shared in Windows for Workgroups need to be restored. Windows 95 can be set up to run from a network server. The Windows 95 Resource Kit contains complete instructions for installing Windows in this environment (see Chapter 4, "Server Based Setup for Windows 95 "). The following configurations are supported: - Novell Workstation Shell 3.
x (NETX) - Novell Workstation Shell 4. x (VLM) - Novell Workstation Shell 3. x (NETX) - Novell Workstation Shell 4. x (VLM) - Booting from a remote boot server using: - Novell Workstation Shell 3.
x (NETX) - Novell Workstation Shell 4. x (VLM) To use one of the Microsoft clients, your network card must have both an NDIS 2 (16 -bit real mode) AND an NDIS 3 (32 -bit protect mode) driver. If your network card is a PCI, EISA, or ISAPNP card, you must run Windows over a real-mode client. To Install Windows 95 over Previous Builds To install this final version of Windows 95 on network computers that are already running Windows 95, you have two choices: - Do a clean install on each computer; - Upgrade each computer using the following procedure: 1. Shut down any clients running from the server. 2. Windows 95 must be installed on the server into the same folder that you were using for previous builds.
Delete everything in the shared Windows 95 folder, and then run Net setup. exe to install this 3. Restart the client to a command prompt. 4. If you are using the Microsoft Client for NetWare Networks and use map rooted drives, you must start either NETX or VLM to run Setup. 5. Map drives to the machine folder and shared Windows 95 folder as before. These must use the same drive letters as used in the previous build, and map roots should be to the same folder level.
To install support for a third-party, real-mode network, you must be running the network when you run Windows 95 Setup. Windows 95 does not support installation of a re...
Free research essays on topics related to: netware, card, control panel, device manager, windows
Research essay sample on Control Panel Device Manager
