Customer center

We are a boutique essay service, not a mass production custom writing factory. Let us create a perfect paper for you today!

Example research essay topic: Desalination Plants Sea Water - 1,236 words

NOTE: Free essay sample provided on this page should be used for references or sample purposes only. The sample essay is available to anyone, so any direct quoting without mentioning the source will be considered plagiarism by schools, colleges and universities that use plagiarism detection software. To get a completely brand-new, plagiarism-free essay, please use our essay writing service.
One click instant price quote

Purification of Sea Water In the late 20 th century, more than 8, 000, 000 cubic m (2, 112, 000, 000 gallons) of fresh water were produced each day by several thousand desalination plants throughout the world. Distillation processes are used in about half of all the plants and account for roughly three-quarters of the worlds desalted water. Most of the other plants employ membrane processes. The worlds desalination capacity expanded rapidly during the 1970 s and 80 s as the oil-rich countries of the Middle East improved their standard of living, with attendant changes greatly increasing the consumption of fresh water.

The Middle Eastern countries produce about 75 percent of all the worlds desalinated water. The United States produces about 10 percent, and Europe and Africa each account for approximately 5 percent. The worlds largest desalination plants are in the Arabian Peninsula. Desalination is very important, because in many places on out planet fresh water is a problem, while it is the most important thing for a human being to survive. Although water desalination is expensive, it is sometimes cheaper than shipping freshwater long distances. Desalted water provides the primary source of municipal supply in many areas of the world, and its use is increasing in the United States. (Abulnour 54) Some techniques for desalination are already used widely, while others are now being developed and refined.

There are four main methods of desalination: electrodialysis, reverse osmosis, flash distillation, and solar humidification. Some methods are more effective in different parts of the world. Also, some methods are only used to treat brackish water as they do not remove very much salinity. If a liquid rich in ions is subjected to an electrical field be means of two electrodes with a continuous potential difference applied between them, the cations will be attracted to the cathode and the anions will be attracted to the anode. (Cumberland 34) In the electrodialysis process, the water to be treated is placed in a large tray. A series of membranes (some negative and only permeable by cations, others positive and permeable by anions) are arranged alternately in the trough to trap the separate ions. So, the water rich in salt is forced in one section of the tray, while the freshwater is in another section.

However, salinity can hardly be reduced by more than 50 % be movement through one electrodialysis cell without a loss in efficiency. Consequently, most units comprise several stages in series, and the required reduction in salinity is achieved by successive stages. (Asked 297) The United States has electrodialysis plants converting 2. 25 million liters of brackish water per day. Electrodialysis is more effective on water with a lower salt content. This method can easily and efficiently convert brackish water that contains 3, 000 mg/L.

New membranes are being studied to help make this process better for desalting sea water. Reverse osmosis is the second most common way to desalt water, behind flash distillation. In reverse osmosis, salty water of two different concentrations is separated by a semi permeable membrane. This membrane allows the passage of solvent, but not dissolved substances. Naturally, osmosis will come into play and the two concentrations will start to even out; meaning the dilute side will start to flow to the concentrated side. The difference in pressure between the solutions of different concentration is the osmotic pressure. (D egremont 306) What happens in this reverse osmosis method is that a high pressure, greater than the osmotic pressure, is applied to the membrane and pure water passes through.

A major advantage to this method is the rather simple method that is used. The most common membranes used in reverse osmosis desalination are made of a treated cellulose acetate. Using this membrane, 98 - 99 % of the original salinity is removed at a rate of 150 to 200 liters per day. New research is concentrated on increasing the flow through the membrane, and increasing the reduction in salinity.

Flash distillation is the most widely used method of desalination. It works using evaporation at low pressures. First, hot sea water passes into an area of lower pressure where some of the water evaporates quickly. This instantaneous boiling and the generation of vapor without a heat supply is known as flashing. Distillation takes place and the hot sea water is cooled in the process. Further flash steam can be released at a lower pressure and temperature in a series of stages.

Usually, a flash distillation plant is consisted of a series of chambers that are running at lower temperatures than the previous one. There are also condensing coils that are banks of tinned tubes. The heat that starts the process is steam that has already completed a job, such as a steam turbine in another part of the facility. The sea water flows from one chamber to the next producing water vapor. The vapor is condensed and the freshwater falls into collecting trays. Then the water is put into bulk storage.

Some very large plants have been built for this type of desalination. One, in Tijuana, Mexico, was built in 1970. It uses local sea water and produces 27 million liters of distilled water per day. Abu Dhabi has six facilities distilling nine million liters of water per day. This method is cheaper and more effective than reverse osmosis or electrodialysis. There have been problems with membrane breakage in those methods, hampering production.

The last method of desalination is solar humidification. This is a very cheap and simple method, but production is limited. Sea water is placed in shallow trays with black lining. Black lining is used because it collects heat better than any other color. Over the trays is a roof constructed of glass or plastic. Sunlight passing through the roof heats the water.

Then, the water evaporates and condenses on the cooler under-side of the roof. The condensed water then runs down the slope of the roof and is collected in troughs. It is known that one square meter of water surface is needed to produce 4. 5 liters of water per day. The energy to use complete this process is free, so it is almost ideal.

The only problem is the small amount of desalted water that is produced. This method is used in small communities that cannot afford expensive equipment and do not need a great supply of potable water. The desalination of water is something that will be researched feverishly in the future. On the average, a human in the United States uses 70 gallons of water per day. If we continue this, our freshwater supply will be gone.

One method that can be easily used is flash distillation. Larger and more efficient facilities are being constructed that will yield well over 30 million liters of desalted water per day. We will never run out of water as long as these new methods are being improved upon. Bibliography: Abulnour, A. M. , Sorour, M.

H. , Squeezing Desalted Water Costs by Proper Choice of the Desalting Technology and Water Management, Desalination, May 1983, vol. 44, 189 - 198 Asked, M. , El Hares, H. , Cost Comparison of Effectively Produced Desalted Water by Different Processes in a Developing Country Desalination, vol. 23, no. 1 - 3, Dec. 1977, 285 - 290 Cumberland, J. H. , Effects of Economic Development on Water Resources, Water Resources Research Center, College Park, MD, 1977


Free research essays on topics related to: fresh water, distillation, water resources, desalination plants, sea water

Research essay sample on Desalination Plants Sea Water

Writing service prices per page

  • $18.85 - in 14 days
  • $19.95 - in 3 days
  • $23.95 - within 48 hours
  • $26.95 - within 24 hours
  • $29.95 - within 12 hours
  • $34.95 - within 6 hours
  • $39.95 - within 3 hours
  • Calculate total price

Our guarantee

  • 100% money back guarantee
  • plagiarism-free authentic works
  • completely confidential service
  • timely revisions until completely satisfied
  • 24/7 customer support
  • payments protected by PayPal

Secure payment

With EssayChief you get

  • Strict plagiarism detection regulations
  • 300+ words per page
  • Times New Roman font 12 pts, double-spaced
  • FREE abstract, outline, bibliography
  • Money back guarantee for missed deadline
  • Round-the-clock customer support
  • Complete anonymity of all our clients
  • Custom essays
  • Writing service

EssayChief can handle your

  • essays, term papers
  • book and movie reports
  • Power Point presentations
  • annotated bibliographies
  • theses, dissertations
  • exam preparations
  • editing and proofreading of your texts
  • academic ghostwriting of any kind

Free essay samples

Browse essays by topic:

Stay with EssayChief! We offer 10% discount to all our return customers. Once you place your order you will receive an email with the password. You can use this password for unlimited period and you can share it with your friends!

Academic ghostwriting

About us

© 2002-2024 EssayChief.com